Product characteristics
1, single component, neutral curing, easy to use, curing after -50 to 150 degrees Celsius maintain good elasticity.
2, excellent mould resistance, strong adhesion, no corrosion, no need for primer, that is, good bonding with most building materials.
3. The products are solidified to form cold resistant, heat-resistant and non corrosive elastomers, which have excellent weather resistance, aging resistance, UV resistance, ozone resistance and high low temperature resistance.
Main uses
1. It can be used for mirror bonding without corrosive to mirror coating.
2, applicable to all kinds of kitchen utensils, sanitary ware installation and waterproof, mildew proof seal.
3. The installation and seal of all kinds of windows and doors.
4. Sealing and sealing of indoor materials such as glass, marble, aluminum plate and so on.
Construction Summary
1, can not be used as structural bonding assembly, can not be constructed on wet surface.
2. It is not suitable for all surfaces of grease, plasticizer or solvent. The surface of the substrate is clean and dust-free.
3, should not be used for closed space or direct contact with the surface of food and drinking water.
4. It can maintain good viscosity at -25 C to 50 C and easy to be extruded.
Safety notice
1, sealant construction sites should pay special attention to maintain a good ventilation environment.
2. If your eyes are accidentally exposed to the uncured adhesive, you should wash it with plenty of water in time and seek help from the doctor.
3. Before using this product, users should conduct tests on compatibility and adhesion of contact materials before confirming operation.
4. The company only ensures that the product meets the quality requirements, and is not responsible for any loss caused by any accident or improper use in the course of the use of the product.
Storage period
It should be stored in a cool and dry place below 27 C for 9 months.
Transportation of this product by non dangerous goods
Conform to the standard: B GF 20LM GB/T 14683-2003